Products | Russian Mining Magnesium Hydroxide
Release time:
2022-03-31
Russian Mining Magnesium Hydroxide
In the flame retardant electrical material industry, the most widely used flame retardants are magnesium hydroxide and aluminum hydroxide. In addition to production process and surface treatment, the original mine geology of a good flame retardant has a fundamental impact on product quality. The magnesium hydroxide mine carefully selected by Russian mining has few associated minerals in the raw stone and a high content of brucite (magnesium hydroxide). It is a mineral powder that can replace synthetic magnesium hydroxide in cable materials.
Russian magnesium hydroxide EcoPiren 3,5CA is mainly used in low-smoke and low-halogen cable materials and halogen-free cable materials. Halogen-free cable materials are more common in the market.
1. The most commonly used flame retardant in halogen-free cable materials is aluminum hydroxide, which has a low decomposition temperature and can absorb a large amount of heat at the beginning of combustion. Its better plastic compatibility has been widely used by customers. However, magnesium hydroxide has excellent high-temperature flame retardancy and lower cost. Customers usually use them together.
2. The main resin of low-smoke and low-halogen cable materials is PVC. The general processing temperature is 150 degrees and the wire drawing temperature is about 180 degrees. The decomposition temperature of aluminum hydroxide is only 150 degrees, which is not up to the task. In this direction, customers usually use magnesium hydroxide to meet the low-smoke flame retardant requirements.
Figure 1: Wires and cables

Production process of halogen-free cable materials:
air-cooled hot-cutting method:
1. Mixing in internal mixer (fully dispersed mixing).
2. Double wrist feeding or cone double feeding (forced feeding).
3. Single screw extrusion.
4. Air-cooled die face hot cutting → secondary cyclone → extended air-cooled vibrating screen → silo.
Using 150 extruder can achieve output: 350KG/h (a close mixing machine is necessary to make AL(OH)3 and base material EVA more compatible; if only twin screws are used, the dispersion will be poor; the advantage of using double wrist feeding is that the material is mixed again during feeding; this guarantees the quality of the material).
Figure 2: Halogen-free particles

Haiyi product support
In the cable material industry, magnesium hydroxide from Russian Mining can provide customers with lower-cost solutions. In addition to magnesium hydroxide, Haiyi has more product support:
| supplier | product | Segmented Applications |
| Honeywell | Lubricants | PVC cable material |
| Russian Mining | Magnesium hydroxide | EVA cable material |
| Matsubara | Antioxidants | PE cable material |
| Yirui Stone | 250G | Shielded cable material |
| Sunlight | Carbon Black | Sheath cable material |
| Maitu | Bonding agent | PEX cable material |
| Evonik | Reinforcement agent | Rubber cable material |
What is the difference between EcoPiren 3,5CA and domestic competitors?
The characteristics of the materials produced by the ore method are largely dependent on the natural ore itself. For example, some iron ores have high content and some have low content. The main reason is the mine itself. In the production area of 3,5CA, the dolomite and magnesite associated with brucite are relatively small, and only the component of brucite is magnesium hydroxide, which has flame retardancy. The industry usually uses infrared to detect the element content and derive the total magnesium content, but does not distinguish which type of magnesium ore it is. With the same magnesium content, the real brucite, that is, the effective flame retardant component, will have a difference of more than 20%. In short, the addition amount can be reduced by 20%.
How to use 3,5CA in the formula?
If it is a pure aluminum formula, 15-20% 3,5CA can be added, the mechanical ability remains basically unchanged, and the oxygen index remains unchanged. It can reduce the formula cost and improve the later flame retardancy. If the synthetic magnesium solution is used, 20% of the synthetic magnesium hydroxide in the formula can be replaced to reduce costs. If it is a domestic magnesium formula, the amount of magnesium can be reduced to improve mechanical properties. If it is a formula of aluminum hydroxide with domestic magnesium, the amount of magnesium can be increased and the amount of aluminum can be reduced to develop products with better mechanical properties and lower costs.